Omni IPS Surface Restoration banner.jpg




We offer our services to hotels of all sizes as well as residential property management. With thorough care and attention, our specialists provide a diagnosis of the present condition of a property and deliver a bespoke analysis and detailed work evaluation. In addition to this, our teams offer high level maintenance solutions individually tailored to the facility’s needs.
Covering all aspects of property management and maintenance services, our offerings include but are not limited to:


  • Polishing

  • Resealing 

  • Sanding

  • Cleaning

  • Repair

  • Refinishing

  • Refurbishment

  • Stone re-facing

  • Anti-Slip Treatment

  • Decalcification

  • Flood damage repair

  • Crack repairs

  • Floor slip testing

  • Patio Cleaning

  • Wood restoration

  • Floor Stripping


  • Marble

  • Wood

  • Stone

  • Granite

  • Limestone

  • Terracotta

  • Parquet

  • Flagstone

  • Slate

  • Ceramic

  • Altro

  • Tile

  • Concrete

  • Laminate

  • Porcelain

  • Quartz

  • Terrazzo

  • Yorkstone

  • Sandstone


  • Airports

  • Apartments

  • Factories

  • Food Production Facilities

  • Hospitals

  • Hotels

  • Military Bases

  • Offices

  • Prisons

  • Pubs & Bars

  • Restaurants & Cafes

  • Schools

  • Shopping Centres

  • Universities


14 before.jpg
4 before.jpg


14 after.jpg
4 after.jpg
Marble Surface


Using a mix of traditional techniques and modern equipment, our team handle the restoration, maintenance and cleaning services for marble, granite, limestone, and all natural stone surfaces.

Our unrivalled expertise means that we are familiar with standard maintenance procedures and with the specialised techniques used to polish stone floors. The marble restoration and maintenance process initially involves a deep clean with a combination of a rotary cleaning machines and ‘by hand’ cleaning in the hard-to-access areas. This is followed by using the latest technology diamond resurfacing through a graduated range of abrasive pads that slowly skim off the top surface of the marble. This process is commonly known as marble grinding or honing, and starts with a coarse grit pad that erases surface scratches, some stains, and other forms of surface damage.

We then progress through the finer grades, honing the fresh marble surface with a finer abrasive pad to create a perfectly smooth finish. At this stage, there is a sheen to the surface of the marble which can be left at this level and sealed or impregnated. If a deep polish finish is required, various polishing techniques can be used to achieve a mirror finish. It is this final marble polishing technique that quickly restores the original glossy appearance and enhances the natural colour to the marble.

With a thorough and conscientious approach to work, we focus on quality and value throughout all of our specialist marble services. We strive for invisible repairs wherever possible.



Caused by sharp impact on the stone surface, ladies’ high heeled shoes are the most common cause of stun marks. These marks are sometimes very deep in the stone. Grinding with diamond abrasives can remove or improve some, but if not, replacement of the damaged stone is the only alternative. Deep scratches can usually be repaired by resurfacing with medium to coarse grit diamond abrasives.


Spalling is a condition in which a piece of stone has broken leaving a chip or hole in the face of the stone. These can be repaired by filling with a polyester, epoxy or cement based filler material coloured to match the stone. The affected area must be resurfaced after filling to level the filler material to the stone surface. Replacing the stones is another, but more costly, alternative.


In most cases, staining can be remedied by a process known as ‘poulticing’. The appropriate poultice for the stain is prepared and placed on the stain and allowed to dry. As it dries, it draws the stain out of the stone. If this method doesn’t work, ‘honing’ (grinding) the surface down to a fresh layer of stone and then re- polishing may be needed to remove the stain.


It may be possible to repair cracks by filling them with a suitable filler material. Very large cracks, or very small hairline cracks, cannot generally be filled and the only alternative is replacement.


Lippage or uneven tiles must be ground down or beveled to alleviate the problem. This is done by grinding with coarse grit diamond or abrasive stones.


Etching is a dull area on a stone caused by spills of acidic products such as citrus juice, vinegar, soft drinks, etc. If the etching is very light, it can possibly be repaired by polishing the area with a polishing powder. Heavy etching must be repaired by resurfacing the area with diamond abrasives.


We are also able to provide experienced teams for post-building work cleans, commercial deep cleans, restoration of natural stone surfaces, and property night cleaning.

Hotel Lobby

Core Services

  • Hard surface condition and care reporting and recommendations

  • Risk assessments and method statements

  • Commercial floor & wall cleaning and repair

  • Natural stone re-facing

  • Refurbishment of work tops, vanity tops and reception desk surfaces

  • Planned maintenance packages

  • Anti-slip testing

  • Resealing existing hard surfaces